PDA

View Full Version : Gemini Jetways



QFA388
04-10-2010, 07:12 PM
For the airport builders who want to use the new style GJ jetways and don't have or want to spend the money on the GJ airport buildings, I found a way that they can be attached to your buildings.

Firstly, there is a small lug needs to be cut off. This is the lug that would normally be inserted into the location holes on the GJ terminal.

Secondly, I made a template which permitted me to establish the height and where the jetways would need to be positioned to allow all types of aircraft to be docked.
Then I made a small bracket out of plastic which acts as a locking pin when the jetways are finally installed.
Here's a picture which shows the results and the templates I used.